LanSpeaker

What is LanSpeaker?

LanSpeaker is a browser based app that can be used to control Dutch & Dutch products running firmware versions r1.0 - r1.4. Although the app is still available on lanspeaker.com it is no longer supported. Customer still using LanSpeaker are strongly recommended to upgrade their systems.

Is LanSpeaker still supported?

Official LanSpeaker support ended on January 1st 2020. You will still be able to use the locally hosted version of lanspeaker, as long as you do not update your 8c's.

How do I upgrade from 1.4?

• Make sure the 8c’s you want to upgrade have internet access

• Browse to the locally hosted LanSpeaker by opening http://8c-1234 or http://8c-1234.local in your browser. 

• Go to firmware, follow instructions

• If that doesn’t work: try Release Management System

Where do I find the locally hosted version of LanSpeaker?

Open your internet browser and go to http://8c-1234 or http://8c-1234.local, depending on your router settings.

• Replace “1234” with the serial number of your product.

• Note that the address uses http, not https

LanSpeaker doesn’t discover my 8c’s on the network, how can I solve that?

Add the host name of your 8c’s directly into lanspeaker Open the app config, go to “Known Devices” and then “Add host”. Enter your 8c’s serial number, click “Store” and then “Restart Discovery”. If that doesn’t help, try entering their IP address instead. If the 8c’s are properly connected to your network, then you can find their IP addresses in the interface of your network router.