6c

Connecting to WiFi

The 6c is WiFi enabled, to set it up open the Dutch & Dutch App, enter the setup for a new room, scan both 6c qr codes and set up the WiFi credentials.

Clearing WiFi settings or Bluetooth pairing

When a 6c has been connected to a WiFi network, it remembers the network in order to reconnect later if needed. In some cases you may want to clear these settings to connect the device to the correct network. To clear or change these settings open the Dutch & Dutch App, navigate to the room, click the settings cogwheel in the top right, scroll down to Reset section.

• Reset WiFi will disconnect the 6c and forget the network credentials.

• Reset Bluetooth will forget the Bluetooth pairing that was used to set up the WiFi connection initially.

• Change Wifi allows you to reconfigure the WiFi settings.

• Factory Reset will reset both the room itself and the WiFi & Bluetooth config, returning the speakers to their factory state.

Back LED status